Greetings Dev, if you have encountered the error message “359: The local host server is not running” while working with your local development environment, you are likely to be frustrated and puzzled. However, don’t worry as we are here to help you troubleshoot and resolve this issue. In this journal article, we will discuss the possible causes and solutions for this error message.
What Does the Error Message 359 Mean?
The error message “359: The local host server is not running” is one of the most common error messages encountered by developers who are running a web development environment on their local machine. This error message indicates that the local host server, such as Apache, Nginx or IIS, which is responsible for serving web pages on your local machine, is not running.
Possible Causes of the Error Message 359
There are several possible causes for the error message “359: The local host server is not running”. These include:
Cause |
Description |
|---|---|
Incorrect configuration |
If the configuration files of your local host server are incorrect, the server may fail to start |
Port conflict |
If the port required by your local host server is already in use by another application, the server may fail to start |
Corrupted installation |
If the installation of your local host server is corrupted, the server may fail to start |
Solutions to the Error Message 359
Incorrect Configuration
If the error message “359: The local host server is not running” is caused by incorrect configuration files, you need to review and update these files. The configuration files of your local host server are typically found in the installation directory of the server application.
Apache Configuration
If you are using Apache as your local host server, the configuration files are typically located in the /etc/apache2/ directory on Linux or macOS, and in the conf directory on Windows.
Step 1: Verify the Configuration Files
To verify the configuration files of Apache, you can run the following command on your terminal:
sudo apachectl configtest
If there are no errors in your configuration files, you should see the following output:
Syntax OK
If there are errors in your configuration files, Apache will not start and you will need to fix the errors before the server can be started.
Step 2: Restart Apache
To restart Apache, you need to run the following command:
sudo apachectl restart
If there are no errors in your configuration files, Apache should start successfully and you can access your web pages through your local web browser.
Nginx Configuration
If you are using Nginx as your local host server, the configuration files are typically located in the /etc/nginx/ directory on Linux or macOS, and in the conf directory on Windows.
Step 1: Verify the Configuration Files
To verify the configuration files of Nginx, you can run the following command on your terminal:
sudo nginx -t
If there are no errors in your configuration files, you should see the following output:
nginx: the configuration file /etc/nginx/nginx.conf syntax is oknginx: configuration file /etc/nginx/nginx.conf test is successful
If there are errors in your configuration files, Nginx will not start and you will need to fix the errors before the server can be started.
Step 2: Restart Nginx
To restart Nginx, you need to run the following command:
sudo service nginx restart
If there are no errors in your configuration files, Nginx should start successfully and you can access your web pages through your local web browser.
IIS Configuration
If you are using IIS as your local host server, the configuration files are typically located in the C:\Windows\System32\inetsrv\config directory on Windows.
Step 1: Verify the Configuration Files
To verify the configuration files of IIS, you can use the Internet Information Services (IIS) Manager to check the configuration files.
Open the IIS Manager and navigate to the Sites node. Check that the necessary web sites are present and that their bindings are configured correctly.
If there are errors in your configuration files, IIS will not start and you will need to fix the errors before the server can be started.
Step 2: Restart IIS
To restart IIS, you need to run the following command on your terminal:
net stop w3svcnet start w3svc
If there are no errors in your configuration files, IIS should start successfully and you can access your web pages through your local web browser.
Port Conflict
If the error message “359: The local host server is not running” is caused by a port conflict, you need to free up the port or configure your local host server to use a different port.
Step 1: Check Which Port is in Use
To check which port is in use, you can use the lsof command on your terminal:
sudo lsof -i :80
The output should show which process is using the port. You can then either stop the process or configure your local host server to use a different port.
Step 2: Configure Your Local Host Server to Use a Different Port
To configure your local host server to use a different port, you need to update the configuration files of your server. The specific steps for updating the configuration files depend on the server application you are using.
Apache Configuration
If you are using Apache as your local host server, you need to update the /etc/apache2/ports.conf file on Linux or macOS, or the conf/httpd.conf file on Windows.
Find the line that specifies the port number:
Listen 80
Change the port number to a different number, such as:
Listen 8080
Save the file and restart Apache.
Nginx Configuration
If you are using Nginx as your local host server, you need to update the /etc/nginx/nginx.conf file on Linux or macOS, or the conf/nginx.conf file on Windows.
Find the http block and add the following line:
listen 8080;
Save the file and restart Nginx.
IIS Configuration
If you are using IIS as your local host server, you need to update the bindings for the web site in the Internet Information Services (IIS) Manager.
Open the IIS Manager and navigate to the Sites node. Select the web site that you want to update and click on the Edit bindings link in the right-hand pane. Add a new binding for a different port and save the changes.
Corrupted Installation
If the error message “359: The local host server is not running” is caused by a corrupted installation, you need to reinstall your local host server. The specific steps for reinstalling the server application depend on the application you are using.
Apache Installation
If you are using Apache as your local host server, you need to uninstall the existing installation and then download and install the latest version of Apache from the Apache website.
You can download the latest version of Apache from the following link:
https://httpd.apache.org/download.cgi
Follow the installation wizard to install Apache on your local machine.
Nginx Installation
If you are using Nginx as your local host server, you need to uninstall the existing installation and then download and install the latest version of Nginx from the Nginx website.
You can download the latest version of Nginx from the following link:
https://nginx.org/en/download.html
Follow the installation wizard to install Nginx on your local machine.
IIS Installation
If you are using IIS as your local host server, you need to repair or reinstall the installation of IIS on your local machine.
To repair the installation of IIS, follow these steps:
- Open the Control Panel and navigate to
Programs and Features - Click on the
Turn Windows features on or offlink in the left-hand pane - Expand the
Internet Information Servicesnode and select the components that you want to repair - Click on the
OKbutton and follow the instructions to repair the installation
To reinstall the installation of IIS, you can use the Server Manager application on Windows Server.
Frequently Asked Questions
1. What is a local host server?
A local host server is a software application that runs on your local machine and is responsible for serving web pages to your local web browser. Common examples of local host servers include Apache, Nginx and IIS.
2. Why is my local host server not running?
Your local host server may not be running due to incorrect configuration files, port conflicts or corrupted installations.
3. How do I fix an error in my configuration files?
To fix an error in your configuration files, you need to locate the error and correct it. The specific steps for correcting errors depend on the server application you are using.
4. How do I free up a port?
To free up a port, you need to identify which process is using the port and stop the process. Alternatively, you can configure your local host server to use a different port.
5. How do I reinstall my local host server?
To reinstall your local host server, you need to uninstall the existing installation and then download and install the latest version of the server application from the relevant website.
Thank you for taking the time to read this journal article. We hope that the information provided has been helpful in resolving the error message “359: The local host server is not running” in your local development environment. If you have any further questions or comments, please feel free to contact us.